PRODUCT INFORMATION
MM-80
For Heavy Duty Floors
EDGE-PRO XL
For “Moderate Duty Floors
Epoxy Joint Filler
Heavy Duty, Rapid Set Repair Polymer for narrow Cracks.
SPAL-PRO-RSF
For Below Freezing Conditions
Rapid Set for Freezer Rooms
SPAL-PRO- RS 88
Joint Filler
Hard Wheels & Heavy Loads
ES-90
Early Set, Early Shave
Epoxy Joint Filler
|
PRODUCT |
USES |
TDS |
Installation |
|
|
|
|
Instruction |
|
Heavy Duty Semi Rigid Epoxy Joint Filler |
|||
|
|
|
|
|
|
Heavy Duty, Rapid -set Polyurea Polymer |
|||
|
|
Joint Filler & Repair Product |
|
|
|
|
|
|
|
|
|
Simple Concrete Repair |
|
|
|
|
|
|
|
|
|
Cartridge Installation Instruction |
|
|
|
|
|
|
|
|
Heavy Duty, Rapid Set Freezer/cooler |
|
||
|
|
Polyurea Joint Filler |
|
|
|
|
|
|
|
|
Heavy Duty, Rapid Set Polyurea Join Filler |
|
||
|
|
|
|
|
|
Semi-Rigid Epoxy joint Filler |
|
||
|
|
|
|
|
|
Early Set (100% Solids) Semi Rigid Joint Filler |
|
||
|
|
for Industrial Floors (like very hard rubber) |
|
|
|
|
Function support hard wheeled traffic |
|
|
|
|
|
|
|
|
JOINT FILLERS SELECTION GUIDE |
|
||
|
|
|
|
|
|
GUIDE TO FLOOR REPAIRS |
|
||
|
|
|
|
|
|
The Myth of "Flexible" Fillers for Industrial |
|
||
|
|
Concrete Floors |
|
|
|
|
|
|
|
|
PRODUCT FEATURES COMPARISON |
|
||
|
|
|
|
|
|
|
|
|
|
Product Filler Information
FOR PRODUCT INFO DOUBLE CLICK ON PRODUCT BELOW
FOR TECHNICAL INFO DOUBLE CLICK ON TDS OR II BELOW
|
MM-80 is the "only true heavy duty" filler on the market.
|
Never Let Downtime Dictate Your Floor Repairs Again!
Spal-Pro 2000 offers you unprecedented access time and versatility for all your industrial floor joint and crack repair needs. Now you can perform durable, permanent repairs and have the repair areas restored for operations in 30 minutes or less. Dual-cartridge convenience kits ensure an accurate and simple installation. No measuring, no mixing, no mess.
Spal-Pro 2000’s superior formulation guarantees consistent cure and quality in all interior environments; so soft, hard or uncured spots as with some other polyureas.
Heavy Duty, Rapid Set Repair Polymer for Narrow cracks
Rapid Set, Heavy Duty Polyurea Polymer
Joint Filler and Repair Product
Available in 450 ML & 900 ML
Dual Cartridge Kits (Shown) & Bulk Units
Early Traffic Ready: 15 Mins.
Full Traffic Ready: 30 Mins.
Temperature Range: -30ºF to +120ºF
For Moderate Duty Floors
EDGE-PRO XL is similar to MM-80 in almost all cured characteristics,
but may not have the same long term load carrying capacity as MM-80.
EDGE-PRO XL can be used for the following:
1.Floor is an ACI Class 5
2.Vehicle-plus-load weight is less than 15,000 lbs.
3.Vehicles have pneumatic tires.
Note: EDGE-PRO XL should not be used in freezer or cooler rooms
Similar Fillers: Euco 700, Sika 51 SL and Masterfill CJ
Note: EDGE-PRO XL was formerly “Spal-Pro XL”
SPAL-PRO RSFshould be used for all joints in areas to be maintained at temperatures below 32F, regardless of floor classification or wheel/tire type.
Similar Fillers: No true equal products; Price Bond#123 and Chemtron are closest.
SPAL PRO RS-88 was developed to fill and protect joints in industrial concrete floors that are subject to hard-wheeled traffic and heavy loads. Its primary function is to support this traffic and protect joint edges. RS-88 is designed for use in areas where the final temperatures are from 40 deg. F to + 120 deg. F.
RS-88 is a rapid setting, two-component polyurea polymer liquid of 100% solids content. When cured, RS-88 is gray, rubberlike solid with a hardness of Shore A 88-92.
RS-88 is not designed for use in 1” or larger cracks and may discolor if subjected to UV rays.
ES-90 was developed to fill and protect joints in industrial concrete floors that are subject to hard-wheeled traffic. Its primary function is to support this traffic and protect joint edges. ES-90 is designed for use in areas where the final temperatures are from 50 deg. F to + 120 deg. F.
ES-90 is a two-component epoxy joint filler. When cured, ES-90 is gray, semi-rigid filler with a hardness of Shore A 90.
ES-90 is not designed for use in:
True expansion joints
Exterior joints (paving, etc.)
Freezer/cooler joints
Joints subject to chemical exposure
 |
 |
